-> professional PROSTD


max. cutting diameter of branches
16 cm
length of cutting of chips
6 cutters 18-30 cm
8 cutters 15-25 cm
min/recommended power
90 / 150 km
mat. obtained after cutting

Detailed description

RP-200 PROFESSIONAL roller chopper is designed for cutting branches with a diameter of up to 16 cm, completely designed and developed by REMET CNC TECHNOLOGY. The frame is made of metal sections of wide spacing of support, expandable extended inlet hopper of high rigidity and reinforced with a section. The chopper is fitted with safety switch around the inlet hopper (safety switch should be connected with emergency module in the tractor).  Cutting mechanisms manufactured precisely on CNC machining centre from one assumption to provide proper quality, accuracy and axis alignment which translates into long service life of sub-assemblies and the entire device. The mechanism is fitted with an expanding and clamping sleeve which serves for the positioning of cutting blades, and also performs a function of overload protection. The chopper may be fitted with a flywheel/pulley and expandable belt conveyor, thanks to which chopper operation becomes more effective and much more comfortable.

Chopper’s drive is transmitted by power transmission shaft from tractor’s WOM (right-hand rotation) We recommend using power transmission shafts fitted with a with shear pin coupling (available in our offer), in the case of machine overload the pin is sheared thus switching off the drive.

Processed wood is an effective and organic fuel, ideally suited for burning in all types of central heating furnaces.

Blades of cutting mechanism are made of HARDOX abrasion resistant steel guaranteeing long and effective operation of the machine.


  • reinforced welded construction (fully dismountable)
  • additional rear roller for flywheel/pulley
  • adjustable clearance between cutters
  • induction hardened gear wheels
  • extended, reinforced with a profile fold-out hopper with a safety switch
  • reinforced frame made of metal profiles
  • ball and bolt coupling for a trailer
  • three-point tractor attachment system

Technical data

max. cutting diameter of branches

16 cm

length of cutting of chips

6 cutters 18-30 cm
8 cutters 15-25 cm

Seria produktu (info)


mat. obtained after cutting


Minimum/recommended power

90 / 150 km

Number of cutters

6 or 8

Recommended PTO drive speed

about 540 rpm

Direction of rotation of the WOM roller


Max. cutting diameter of branches

dry hard wood 140 mm
fresh hard wood 150 mm
fresh soft wood 160 mm

Length of cutting of chips

6 blades 18-30 cm
8 blades 15-25 cm

Maximum efficiency

18 m3/h

The internal width of the cutting mechanism

300 mm

Manufacturing of cutters

HARDOX steel type 500

Thickness of cutters

15 mm

Diameter of gears (induction hardened)

340 mm

Hopper (dimensions)

620/380 mm

Chipper attachment system

Three-point suspension system

Trailer attachment: towing power

1000 kg


460 kg

Overload protection

REQUIRED POWER SHAFT WITH A PROTECTION COUPLER 1700-2700 Nm (articulated telescopic shaft)

Emergency switch

Can be connected to the emergency stop module of the PTO drive in the tractor

Shaft for the flywheel


Ask about the product

    * - Required fields


    is a modern and dynamically developing family business, specialising in professional machining of metals and plastics on CNC machine tools.

    We welcome you to get to know our product range, and visit our YouTube channel and Facebook profile where we constantly post information about current promotions and videos from the work of a wood chipper.

    We will call you!

    Our consultants will gladly provide you with all the information and help to choose a wood chip that matches your