RPS-120 PROFESSIONAL roller chopper is fitted with high quality four-stroke two cylinder Briggs & Stratton 16 KM or 23KM engine. Cutting assembly is placed on the turntable (360˚rotation angle) which may be fixed to a trailer. Expandable extended inlet hopper of high rigidity is reinforced with a profile. The chopper is fitted with safety switch around the inlet hopper and expandable belt conveyor with 2.3 m dogs. The shredder is designed for the processing of wooden waste and branches with a diameter of up to 10 cm. Processed wood is an effective and organic fuel, ideally suited for burning in all types of central heating furnaces.
The chopper has been completely designed and developed by REMET CNC TECHNOLOGY. Completely expandable welded structure providing proper rigidity and resistance. Cutting mechanisms manufactured precisely on CNC machining centres from one assumption to provide proper quality, accuracy and axis alignment which translates into long service life of sub-assemblies and the entire device. Blades of cutting mechanism are made of HARDOX abrasion resistant steel guaranteeing long and effective operation of the machine.
The cutting mechanism is fitted with an expanding and clamping sleeve which serves for the positioning of cutting blades, and also performs a function of overload protection.
The chopper may be used with a chassis designed for mobile or land transport and a 1.6m long stationery belt conveyor or 2.3 m long expandable conveyor.
|max. cutting diameter of branches||
|length of cutting of chips||
6 cutters 8-15 cm
|Seria produktu (info)||
|mat. obtained after cutting||
|Briggs & Stratton Engine||
VANGUARD 16 HP, OHV, four-stroke, single cylinder, air cooled
electric and manual
|Fuel tank capacity||
5 l (E95)
|Number of cutters||
6 or 8
|Max. cutting diameter of branches VANGUARD 16 HP||
dry and hard wood 70 mm
|Max. cutting diameter of branches VANGUARD 23 HP||
dry and hard wood 80 mm
|Length of cutting of chips||
6 blades 8-15 cm
|The internal width of the cutting mechanism||
|Manufacturing of cutters||
HARDOX steel type 500
|Thickness of cutters||
|Diameter of gears (induction hardened)||
Off-road with a drawbar
Limit switch surrounding the hopper
|Shaft for the flywheel||