in Poland
in Germany
in the Czech Republic
Model M-100
| Max. cutting diameter | 10 cm |
|---|---|
| Length of cutting of chips | 4 cutters 9-18 cm |
| Min. / Recommended power | 15 / 25 km |
| Product series | standard |
M-100 cutting mechanism is designed for cutting branches with a diameter of up to 9 cm and has been designed and developed by REMET CNC TECHNOLOGY from certified 20 mm metal sheet.
M-100 cutting mechanism is designed for cutting branches with a diameter of up to 9 cm and has been designed and developed by REMET CNC TECHNOLOGY from certified 20 mm metal sheet. Welded structure providing proper rigidity and reliance of design. Machined on the precise CNC machining centre from one assumption to provide proper quality, accuracy and axis alignment which translates into long service life of sub-assemblies and the entire device. The mechanism is fitted with an expanding and clamping sleeve which serves for the positioning of cutting blades, and also performs a function of overload protection.
Specification
- welded construction (fully dismountable)
- additional rear roller for flywheel/pulley
- adjustable clearance between cutters
- induction hardened gear wheels
- through fixing holes
- threaded holes for covers
-
standard
Max. cutting diameter 4 cm
Length of cutting of chips 4 cutters 5-12 cm
Min. / Recommended power 10 / 15 km
Product series standard
-
standard
Max. cutting diameter 8 cm
Length of cutting of chips 4 cutters 9-15 cm
6 cutters 5-12 cmMin. / Recommended power 10 / 20 km
Product series standard
-
standard
Max. cutting diameter 12 cm
Length of cutting of chips 6 cutters 8-15 cm
8 cutters 5-10 cmMin. / Recommended power 25 / 35 km
Product series standard
-
standard
Max. cutting diameter Length of cutting of chips 6 cutters 12-18 cm
8 cutters 10-15 cmMin. / Recommended power 45 / 80 km
Product series standard
-
standard
Max. cutting diameter 17 cm
Length of cutting of chips 6 cutters 14-22 cm
8 cutters 10-15 cmMin. / Recommended power 90 / 150 km
Product series standard
