Model M-200
Detailed description
M-200 cutting mechanism is designed for cutting branches with a diameter of up to 16 cm and has been designed and developed by REMET CNC TECHNOLOGY from certified 20 mm metal sheet. Welded structure providing proper rigidity and reliance of design. Machined on the precise CNC machining centre from one assumption to provide proper quality, accuracy and axis alignment which translates into long service life of sub-assemblies and the entire device. The mechanism is fitted with an expanding and clamping sleeve which serves for the positioning of cutting blades, and also performs a function of overload protection.
Specification
- welded construction (fully dismountable)
- additional rear roller for flywheel/pulley
- adjustable clearance between cutters
- induction hardened gear wheels
- through fixing holes
- threaded holes for covers
Technical data
| length of cutting of chips | 6 cutters 14-22 cm |
|---|---|
| max. cutting diameter of branches | 16 cm |
| Minimum/recommended power | 90 / 150 km |
| Number of cutters | 6 or 8 |
| Recommended PTO drive speed | about 540 rpm |
| Direction of rotation of the WOM roller | Clockwise |
| Max. cutting diameter of branches | dry hard wood 140 mm |
| Length of cutting of chips | 6 blades 14-22 cm |
| Maximum efficiency | 18 m3/h |
| The internal width of the cutting mechanism | 300 mm |
| Manufacturing of cutters | HARDOX steel type 500 |
| Thickness of cutters | 15 mm |
| Diameter of gears (induction hardened) | 340 mm |
| Weight | 300 kg |
| Overload protection | REQUIRED POWER SHAFT WITH A PROTECTION COUPLER 3000-3500 Nm (articulated telescopic shaft) |
| Shaft for the flywheel | Ø45mm |
max. cutting diameter 
min/recommended power 
length of cutting 
