Model M-40
max. cutting diameter of branches
4 cm
length of cutting of chips
4 cutters 5-12 cm
min/recommended power
10 / 15 km
Detailed description
M-40 cutting mechanism is designed for cutting branches with a diameter of up to 4 cm and has been designed and developed by REMET CNC TECHNOLOGY from certified 10 mm metal sheet. Welded structure providing proper rigidity and reliance of design. Machined on the precise CNC machining centre from one assumption to provide proper quality, accuracy and axis alignment which translates into long service life of sub-assemblies and the entire device.
Specification
- welded construction (fully dismountable)
- additional rear roller for flywheel/pulley
- through fixing holes
Technical data
| length of cutting of chips | 4 cutters 5-12 cm |
|---|---|
| max. cutting diameter of branches | 4 cm |
| Minimum/recommended power | 10 / 15 km |
| Number of cutters | 4 |
| Recommended PTO drive speed | about 540 rpm |
| Direction of rotation of the WOM roller | Clockwise |
| Max. cutting diameter of branches | dry hard wood 20 mm |
| Length of cutting of chips | 4 blades 5-12 cm |
| Maximum efficiency | 2 m3/h |
| The internal width of the cutting mechanism | 180 mm |
| Manufacturing of cutters | HARDOX steel type 500 |
| Thickness of cutters | 8 mm |
| Weight | 30 kg |
| Overload protection | REQUIRED POWER SHAFT WITH A PROTECTION COUPLER 900 Nm (articulated telescopic shaft) |
max. cutting diameter
min/recommended power
length of cutting
