DISK CHOPPER RT-630
Max. średnica cięcia | 12 cm |
---|---|
Min. / zalecana moc | 15 / 45 km |
Materiał uzyskany po cięciu | chips |
Seria produktu | standard |
RT-630 disk chopper is designed for shredding branches, trunks with a diameter of up to 13 cm, and other wooden materials e.g. lumber-mill chips.
RT-630 disk chopper is designed for shredding branches, trunks with a diameter of up to 13 cm, and other wooden materials e.g. lumber-mill chips. The thickness of forest chips may be adjusted by means of four replaceable blades (made of HRDOX 500 steel), by adjusting their position against counter-blade. Blades are fixed to cutting disk with a diameter of 630 mm, which due to its weight serves as a flywheel.
The chopper is fitted with protective covers providing safe operation. Discharge stack may be rotated 360˚ in order to discharge stream of chips in proper direction. The chopper is characterised by high capacity and high comfort of operation. Chips may be used as a fuel (useful for screw feeders) or as a compost or a priming for shrubs.
Chopper’s drive is transmitted by power transmission shaft from tractor’s WOM (right-hand rotation). We recommend using power transmission shafts fitted with a shear pin coupling (available in our offer), in the case of machine overload the pin is sheared thus switching off the drive. Lubricating of rolling bearing is done by means of grease nipples in bearing shell.
-
professional
Rębak Tarczowy RT-720RH z własną hydrauliką
Max. średnica cięcia 17 cm
Min. / zalecana moc 55/80 KM
Seria produktu professional
-
standard
ДИСКОВЫЙ ИЗМЕЛЬЧИТЕЛЬ RT-630
Max. średnica cięcia 12 см
Min. / zalecana moc 15 / 45 л.с
Materiał uzyskany po cięciu chipsy
Seria produktu standard
-
BROYEUR À DISQUE RT-630
Max. średnica cięcia 12 cm
Min. / zalecana moc 15 / 45 km
Waga Materiał uzyskany po cięciu chips
-
professional
Rębak tarczowy RT-720R z rolkami wciągającymi
Max. średnica cięcia 17 cm
Min. / zalecana moc 55 / 80 km
Materiał uzyskany po cięciu zrębka
Seria produktu professional
-
professional
Rębak tarczowy RT-690R z rolkami wciągającymi
Max. średnica cięcia 13 cm
Min. / zalecana moc 35 / 50 л.с
Materiał uzyskany po cięciu chipsy
Seria produktu professional