DISK CHOPPER RTS-630
Max. średnica cięcia | 10 cm |
---|---|
Moc | 13 KM |
Materiał uzyskany po cięciu | chips |
Seria produktu | standard |
RTS-630 disk chopper is designed for shredding branches, trunks with a diameter of up to 10 cm, and other wooden materials e.g. lumber-mill chips.
RTS-630 disk chopper is designed for shredding branches, trunks with a diameter of up to 10 cm, and other wooden materials e.g. lumber-mill chips. The thickness of forest chips may be adjusted by means of four replaceable blades (made of HRDOX 500 steel), by adjusting their position against counter-blade. Blades are fixed to cutting disk with a diameter of 620 mm, which due to its weight serves as a flywheel.
The chopper is fitted with protective covers providing safe operation. Discharge stack may be rotated 360˚ in order to discharge stream of chips in proper direction. The chopper is characterised by high capacity and high comfort of operation. Chips may be used as a fuel (useful for screw feeders) or as a compost or a priming for shrubs.
The chipper is driven by an induction four-stroke internal combustion engine with a capacity of 15 hp. The drive is transmitted through a belt transmission. The device is equipped with a safety switch located next to the hopper. Lubrication of rolling bearings is carried out through calipers in the bearing housing.
-
standard
ДИСКОВЫЙ ИЗМЕЛЬЧИТЕЛЬ RTS-630
Max. średnica cięcia 10 см
Moc 13 ЛС
Materiał uzyskany po cięciu chipsy
Seria produktu standard
-
standard
DISK CHOPPER RTE-630
Max. średnica cięcia 12 cm
Moc 7.5 kW
Materiał uzyskany po cięciu chips
Seria produktu standard
-
standard
Rębak Tarczowy RTS-630 (bez podwozia)
Max. średnica cięcia 10 cm
Moc 15 KM
Seria produktu standard
-
standard
Rębak Tarczowy RTS-630 + Przyczepka
Max. średnica cięcia 10 cm
Moc 15/16 KM
Seria produktu standard
-
professional
Rębak tarczowy RT-720R z rolkami wciągającymi
Max. średnica cięcia 17 cm
Min. / zalecana moc 55 / 80 km
Materiał uzyskany po cięciu chips
Seria produktu professional